If you have hard water in your house, then a water softener is a must-have for you. If you have chosen and bought a water softener system, and need a guide to install it, then this is it.

Shut Off The Water Supply

The first thing you want to do before installing a water softener is to turn off the main water supply in the house. Since the water softener will be attached to the main water line, you want to ensure that it’s screwed closed. You don’t want to install a water softener with the water running anywhere, because that’s going to turn into an accident and there will be a lot of water wastage.

While you’re at it, if you have a water heater for your house too, then you need to turn off the power on that as well. Since you’re working with water, you don’t want any electrical connections, otherwise, things will take a turn for the worse.

So, always take these precautions and you’ll see that the whole installation process will be a breeze and there won’t be any issues or hiccups along the way, because those can not only make things time-consuming, but it’s also a huge hassle.

Close Taps And Faucets

Another thing that you want to do when you’re installing a water softener is to close any running taps, pipes, or faucets. If someone wants to take a bath, then you’ll need to pause the installation and then start it when there is no running water anywhere in the house.

This is important because there can be sediments in the water when you install the water softener and you don’t want it to get choked, so you must close all of the taps in the house. The installation of a water softener usually takes about 1 to 2 hours to get done, so it shouldn’t be a problem.

Pick A Place

This is the most crucial thing to figure out and that is where you want to put the water softener. You must have a place picked for the water softener because that’s going to save you a lot of time.

Most of the time, people think that they need to put the water softener right by the main line, however, that’s not always possible, so you can put it in a roomy place and then measure the pipe from the main line to the softener. It’s really that simple.

Measure, Measure, Measure

The next thing you want to do, is to measure the pipes you’ll be needing for the water softener and for connecting the assembly to the main line. It’s really important to measure the pipes correctly and it won’t hurt if you check the measurements twice, before actually cutting the pipes, because that’s going to lead to a lot of problems and you’ll waste pipes too.

So, always double and triple-check the measurements, because you want to get everything right from the get-go. If you’re getting your water softener professionally installed, then that’s not going to be an issue, because these guys have installed a lot more water softeners than anyone and they will also get everything efficiently done.

Install An Elbow Pipe

Now, you want to work on the main water line from where raw water is supplied to your house and connect it with the water softener assembly. For this, you will need to make a cut in the main line of the water softener and then attach an elbow fitting on the top of the cut. This is going to make the water flow from the main line and straight into the water softener, so it will make things a lot easier for you.

Attach Pipes To The Unit

Remember the pipes you cut? Well, now is the time to attach them to the rest of the assembly. If you’re doing it by yourself, then you should read the instructions and if you want, you can even watch a ton of videos that are available on the internet and this will give you a better visual idea.

If you’re getting the water softener professionally installed, then you don’t need to worry about these things. This is why it’s important to evaluate whether you want to go for a professional installation or a DIY installation for water softeners and water filtration systems Erie.

Secure The Drain Hose

The next thing that needs to be done after pipe installation is to secure the drain hose with a clamp. This is important because there is water in the drain hose and during the cycle of regeneration and even water softening, there can be a lot of back pressure in the water, so you want to ensure that the drain hose is clamped and secure, so that it won’t budge.

When securing the drain hose, make sure that there is a space of two to three inches so that the water pressure doesn’t directly impact the clamp.

Connect The Overflow Tube

Next up is the connection of the overflow tube in the water softener. This contraption ensures that there isn’t any unnecessary pressure in the water and it’s not impacting the performance of the water softener.

For this, you will need to check the manual or instructions for installation, because there are specific height and length dimensions that you need to ensure when installing it in the water softener. The more you follow a water softener instruction manual, the better the results will be in the end and you won’t run into problems and delay the process of installation.

Remove Sediments

This is pretty much the last step, as far as water softener installation is concerned. All you need to do now is to remove any sediments that might be in the water since it was stagnant for a long time.

For this, you will simply need to switch the valve to the bypass setting and you will essentially flush the water through the water softener and the main line. This is important to do because you don’t want any obstructions when you’re operating the water softener for the first time after its installation. So, this step is necessary.

Do A Test Run

Last but not least, once the installation is done, you can give the water softener a test run. You need to open up the main line and let the water flow into the top of the water softener. Once that is done, you will turn on the water softener and you will see how it performs.

There shouldn’t be any weird sounds, clicking, or gurgling noises in the water softener, because that indicates obstruction and it probably happens when you don’t flush out the sediments from the water. Once the water softener is working properly, you can use it.

Conclusion

You can either install a water softener by yourself or you can get it done by a professional. If you know your way around a water softener and are good with plumbing and home improvement, then it will be easier to DIY this. But if you want the water softener installation Warren to be perfect, then hiring an expert would be a better option.